Ibm System P5 Serial Connection To Pc

카테고리 없음

Ibm System P5 Serial Connection To Pc

xabtedispe1970 2020. 2. 21. 14:16

I'd be surprised if the 51A would support 5.2.I found this p510 redbook:Which says:'If you are installing AIX 5L on the server, the following minimum requirements must be met:AIX 5L for POWER V5.2 with the 5200-09 Technology Level (APAR IY82425), or later.AIX 5L for POWER V5.3 with the 5300-05 Technology Level (APAR IY82426), or later.' If you consider these may be the minimum requirements for the 510 the the 51A may well need higher levels and not support 5.2 at all.Make sure you have AIX install media at least at 5.2 TL09 - out of support already so install 5.3 if you can - at TL09 if poss because TL08 goes end of defect support in about a month - and let us know how you get on.If you still have problems let us know what monitor you use, how it is connected, what settings you are using, Etc.If poss try installing 6.1 just to see if that works.

Ibm System P5 Serial Connection To Pc Download

Hi,We got a new Ibm P5 Series server with a HMC console, whenit boots we have codes beginning with C displayed on the operatorpanel after that it looks like normal initialisation (01 N V=F, HMC=0 T),but nothing is displayed on the HMC, nothing is displayed on an Asciiconsole that we added on the first serial port.What can be the problem?ThanksRegardsBandonEnvoyez avec Yahoo! Une boite mail plus intelligente http://mail.yahoo.fr. I'm not sure why you don't see any display on the HMC if you config'd the system on it.

Serial Connection Cable

Which you must do first before booting the new system for the first time. You didn't specify whether you had config'd the system to the HMC first or not. If you didn't you'll have to remove it from the HMC and basically start over.If my memory serves me you also can't put a ASCII console on the first serial port. It has to be the second or third port.

Some p5 systems don't allow an ASCII console at all so you need to check your model against what IBM has posted.You didn't say what model p5. Go check it out at the support site.Hope that helps. Once you get rolling with your P5 should you need more systems or helpupgrading existing systems keep us in mind. We can offer you some techsupport on situations like this.Best Regards,Raymond R. ZawackiChairman of Elarasys Inc.Great used IBM pSeries xSeries FastT Sun Cisco and more!!!Elarasys Inc. Www.Elarasys.comPhone 847-468-8900Fax 847-468-0100Cell 847-951-6400AOL IM RISC6000.Get fantasy football with free live scoring.

Ibm P5 520